How to build a stylish brick fireplace yourself
As with an outdoor fireplace, decide in advance where you want your brick fireplace to stand. When choosing the spot, think about the direction of the winds that blow most often where you live, so that you do not blow smoke into your home or bother your neighbours. Also draw up a plan showing the dimensions, the materials used and a suitable location.
Remember that sufficient internal dimensions for a typical permanent garden fireplace are 70 x 50 x 50 cm (width, depth, height).
The fireplace step by step
- Start building a masonry garden fireplace by digging a pit of a suitable depth. Ideally, its lowest point should not freeze in winter. This depends on the area where you live, but is generally at a depth of about 60 to 80 centimetres.
- Fill the pit with gravel, which will act as drainage. On top of it, pour a concrete foundation slab or ring beam. Water must not be left standing on the concreted area, so that the foundations are not damaged in frosty weather. Otherwise, the fireplace may fall victim to winter frosts.
- Continue on the concrete slab either directly, or add insulation as you would when building a house.
- Use smooth bricks to build the fireplace. They tend not to absorb water and are frost-resistant. So-called facing bricks are ideal. However, sand-lime bricks are also suitable. Then line the inside of the fireplace, which will come into contact with high temperatures, with fireclay bricks. Otherwise, the white bricks would crumble in the heat.
- When laying the bricks, remove any mortar squeezed out of the joints immediately. Otherwise, you will have to chip it off laboriously later. Use fireclay mortar to join the fireclay bricks.
- When building the chimney, remember that a garden fireplace also needs a good draught. Otherwise, the flue gases would escape through the open part. For a firebox of standard size, the optimal chimney height is about 2.5 metres above the ground. The larger your fireplace’s firebox, the taller the chimney needs to be.
The grate and other fittings
A fireplace grate is a type of grate used inside a fireplace or fireplace insert. Its purpose is to support the logs and allow them to burn. A fireplace grate is usually made of iron or steel and is typically designed to give easy access to the logs and to allow easy maintenance.
It is definitely worth thinking about the right grate in advance. Fitting it later is usually very laborious, and drilling inside a finished fireplace is difficult. The easiest way to create ledges is with protruding bricks. Do not forget hinges and hooks either.
Try fruit tree wood for burning
Wood from fruit trees (apple, cherry or plum) is well suited for burning in a fireplace. Alder is also suitable. These woods burn more slowly than conifer wood. The wood should be properly dried so that it does not smoke unnecessarily. Softwood takes about a year to dry naturally. Hardwood takes up to three years.
After reading our article, take a look at our tips for a garden fire pit, where to hide a sand filter, or tips on putting together a men’s wardrobe.





Leave a Reply