Thermal insulation and how to choose the best internal and external option
One of the possible ways to reduce energy consumption is to insulate your home. Insulation stops heat escaping from inside and entering from outside. In summer, it keeps the interior from overheating.
Where external insulation is not possible, internal insulation is the only option. The first step should always be to consider insulating the ceilings, because ceilings are where the most heat is lost. Insulating ceilings is also usually cheaper than insulating the external walls. Insulating your house is one of the ways to save money on heating it.
Is internal or external insulation better?
Internal insulation on its own is used only in special situations (for example, in historic buildings or in old houses with stone walls). It is very important that the thermal insulation lets as little through as possible and is continuous. Impermeability is achieved with special membranes, which are applied to the wall before the insulation itself.
Bear in mind that internal insulation is not as effective as external insulation. The best solution is a combination of both, but as mentioned at the start, this is not always possible.
Even so, internal insulation has its advantages. The main one is that the interior surface temperature stabilises quickly. The disadvantage is that it reduces the interior space.
How to do it yourself
Insulating walls is one of the simpler jobs. However, it takes time, because you have to wait for the insulation layers to dry.
You will need a stepladder, a spirit level, a metal rasp for polystyrene, a trowel, a scraper, a plastering float, polystyrene boards, adhesive, low-expansion foam, interior paint, primer (to degrease the walls) and finishing plaster (fine render).
The work can be divided into 3 stages:
- Step 1
First, prime the walls where the insulation boards will be fixed. Prepare the adhesive and start fixing the boards one by one. Fill any gaps with low-expansion foam. Use the spirit level to avoid unevenness on the wall. Once dry, sand the polystyrene with the metal rasp.
Step 2
Apply plaster to the dry wall. Then apply the final coat of fine finishing plaster.
Step 3
Now all that remains is to apply the paint. You can also use special paints that have better properties and reflect more heat. Using them will save you even more on heating. They can also be combined with an anti-mould coating.
And the final step, add to basket
There are many companies on our market selling materials for thermal insulation. From their range you can choose facade polyester along with a good-quality facade adhesive. You can also add a ventilated facade to your basket, for example, to prevent mould.
There are many ways to insulate your house. If you insulate your house well and also get rid of damp, you will live in a much healthier environment free of dust mites and mould.
Leave a Reply